Penta Pure is a leading supplier of water treatment in domestic, commercial and industrial water purification systems, We offer wide range of pre-engineered as well as custom engineered solutions for all water purification needs.
Water Treatment Products by Penta Pure, Brackish Water Reverse Osmosis, Sea Water Reverse Osmosis, Double Pass Reverse Osmosis, Automatic Multi Media Filters, Automatic Carbon Filters, Cartridge Filters, Automatic Water Softeners, Electrodeionization, EDI, Two Column Deionizer or Mixed Bed Deionizer, Ultra Violet Sterilizers (UV), Chemical Dosing Systems, Ozonation Systems, Chlorination Systems, and Custom Built Water Treatment Systems.
We are stockist most of the water treatment components such as membranes, pressure vessels, valves, chemical pumps etc.
Industrial Reverse Osmosis Systems
BW series Reverse Osmosis System
The PP-RT series reverse osmosis system are designed for treating low to moderate TDS feedwaters encountered in municipal supplies, dam and river waters, bore and brackish water sources. These basic systems are designed to be simple to install, operate and require little maintenance. A membrane flush facility is standard and operates each time the system is started to assist with keeping the membranes clean. Continual monitoring of feedwater pressure, RO permeate quality and storage tank level is performed by the integrated microprocessor based controller. Pentapure Reverse Osmosis systems are capable of removing salts as well as other impurities such as bacteria, sugars, proteins, dyes and constituents having a molecular weight greater than 150-250 dalton.
* High pressure stainless steel membrane housing
* Low Energy TFC spiral membrane
* High Pressure Schedule 80 pipe work
* Anti-corrosion multistage pump
* Microprocessor controller with TDS readout
* Automatic flush with raw water
* Low feedwater pressure sensor
* Storage tank level sensor input
* Permeate and reject flow rotameters
* Adjustable pressure regulator valve
* Liquid filled pressure gauges (Filter Feed, RO Feed)
* Concentrate recycling valve
* Electro-polished stainless steel frame
* Powder coated control panel with power supply provisions for pre-filters
Feed Water Requirments
pH: 3.0 : 10.0
TDS: < 5,000ppm (custom-made required when exceed)
Turbidity: < 1.0 NTU (required pre-treatment when exceed)
SDI: < 5.0 (required pre-treatment when exceed)
Hardness: < 50 ppm (required pre-treatment when exceed)
Chlorine: < 0.1 ppm (required pre-treatment when exceed)
Feed water quality, pressures and flow rates have a significant impact on the performance of any reverse osmosis system. To ensure reliable and consistent long-term performance, it is important to supply feed water having the minimum specifications detailed below. If your feed water supply is marginal, you should consider using a feed water break tank and booster pump to supply the system.