Mineral Reverse Osmosis

3

Penta PureĀ® System converts your water into pure drinking water. Penta Pure high quality Reverse Osmosis Systems are the most economical in the International market. It is the best drinking water solution for your every day need. Make a healthy choice for a quality product today.

Domestic Series Capacity: 75 - 150 GPD

MODEL:PP-T0075MIN

Mineral Filter

This filter improves the qualities of clean water by adding necessary for proper human development and health minerals, such as Calcium, Magnesium, Sodium, Potassium and others readily found in many natural mineral waters.Mainly installed with RO systems to complement their absolute filtration qualities
Capacity: 6000 liters
Cations in filtered water:
Ca2+: 34mg/l
Mg2+: 12mg/l
Na+: 22mg/l
K+: 8.5mg/l
Anions in filtered water:
CO32-: 10mg/l
SO42-: 0.3mg/l
Cl-: 0.8mg/l
F-: 0.06mg/l

Features:

  • 3.2 Gallons NSF Standards Water Storage Tank.
  • FDA Approved Polypropylene Made Flat Cap Housing (double o'ring).
  • Automatic Shut-off Valve, Mini Flow Restrictor, Stainless Steel Check Valve.
  • Long Reach Chrome Faucet (upgrade faucet is acceptable)
  • Feed water connector.
  • Drain Saddle Valve.
  • Four Color Coded 1/4 inch Tubing for System Connection
  • Completely Assembled
  • 100% Factory Tested and Sterilized Ready for Installation.
  • Installation Instruction.

CARTRIDGE FILTERS

(Stage 1) 5 Micron Sediment Filter :
With only five micron rating. It is effective in removing dirt, rust and sand particles.

(Stage 2) Carbon Block Filter:
It takes out 99% of the chlorine and organic chemicals. It provides enhanced reduction of taste, odor, and color.

(Stage 3) 1 Micron Sediment Filter :
With only 1 micron rating, provides effective filtration to protect your membrane. It provides for improved membrane performance up to 95% of TDS rejection.

(Stage 4) Reverse Osmosis Membrane:
A thin film composite (TFC) high quality membrane that processes 50 gallons per day. It remove the following hard water contaminants that may be present in your water: lead, cooper, barium, chromium, mercury, sodium, cadmium, fluoride, nitrite, nitrate, and selenium.

(Stage 5) Post Carbon filter:
This carbon post filter removes objectionable tastes and odors to enhance the quality of your drinking water. We are using NSF approved post carbon to guarantee the taste of water.

(Stage 6) Mineral Filter:
This filter improves the qualities of clean water by adding necessary for proper human development and health minerals, such as Calcium, Magnesium, Sodium, Potassium and others readily found in many natural mineral waters.

Specifications:

Membrane: 50 GPD / 189 LPD
With a transformer, available in 110Volt, 220Volt or 240Volt (50/60Hz).
Operation pressure: 5 -80 psi
Dimensions: (cm) 37 (L) x 48(H) x 20 (W) - system
(cm) 28 (L) x 28(W) x 35 (H)- tank
Weight: 9 kg - system
4 kg - tank