PP-RL : Industrial Reverse Osmosis

Penta Pure is a leading supplier of water treatment in domestic, commercial and industrial water purification systems, We offer wide range of pre-engineered as well as custom engineered solutions for all water purification needs.

Water Treatment Products by Penta Pure, Brackish Water Reverse Osmosis, Sea Water Reverse Osmosis, Double Pass Reverse Osmosis, Automatic Multi Media Filters, Automatic Carbon Filters, Cartridge Filters, Automatic Water Softeners, Electrodeionization, EDI, Two Column Deionizer or Mixed Bed Deionizer, Ultra Violet Sterilizers (UV), Chemical Dosing Systems, Ozonation Systems, Chlorination Systems, and Custom Built Water Treatment Systems.We are stockist most of the water treatment components such as membranes, pressure vessels, valves, chemical pumps etc.

pp-rl industrial ro

Model:PP- RL
Industrial Reverse Osmosis
PP-RL series Reverse Osmosis System

The PP-RL series reverse osmosis systems are designed for treating from wide range of water sources including municipal supplies, dam and river waters, bore and brackish water sources. These basic systems are designed to be simple to install, operate and require little maintenance. A membrane flush facility is standard and operates each time the system is started to assist with keeping the membranes clean. Continual monitoring of feedwater pressure, RO permeate quality and storage tank level is performed by PLC controller. Pentapure Reverse Osmosis systems are capable of removing salts as well as other impurities such as bacteria, sugars, proteins, dyes and constituents having a molecular weight greater than 150-250 dalton.

Product Features:
* Schedule 80 rigid pipe work
* Stainless steel control valves and pump
* Programmable PLC controller
* Low feedwater pressure sensor
* Permeate quality sensor & conductivity display
* Storage tank level sensor input (24 VDC)
* Permeate and reject flow rotameters
* Adjustable pressure regulator valve
* Auto flush (optional with permeate water)
* Panel mount pressure gauges
* Electrical mimic panel with status indicators
* Electro-polished stainless steel frame

Feed Water Requirments
pH: 3.0 : 10.0
TDS: < 2,000 ppm (choose BW systems when exceed)
Turbidity: < 1.0 NTU (required pre-treatment when exceed)
SDI: < 5.0 (required pre-treatment when exceed)
Hardness: < 50 ppm (required pre-treatment when exceed)
Residual Chlorine: < 0.1 ppm (required pre-treatment when exceed)

Feed water quality, pressures and flow rates have a significant impact on the performance of any reverse osmosis system. To ensure reliable and consistent long-term performance, it is important to supply feed water having the minimum specifications detailed below. If your feed water supply is marginal, you should consider using a feed water break tank and booster pump to supply the system.